Example of installation on the floor mat, Or on the chassis, Installation – Pioneer GM-D7400M User Manual
Page 12
Advertising
11
Installation
Example of installation on the floor
mat or on the chassis
1. Place the amplifier where it is to be
installed. Insert the supplied tap-
ping screws (4 mm
× 18 mm) into
the screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.
2. Drill 2.5 mm diameter holes at the
point marked, and install the ampli-
fier, either on the carpet or directly
to the chassis.
Drill a 2.5 mm diameter hole
Tapping screw
(4 mm
× 30 mm)
Floor mat
or chassis
Advertising