Pioneer XW-NAC1 - Manual (Page 11)

iPod/iPhone playback 03
11
En
English
Français
Español
• When using the iPod/iPhone to adjust
sound volume, the adjustment will be
applied only to the sound produced from
this unit’s speakers. 1 If the iPod/iPhone is
disconnected from this unit, the iPod’s
sound volume will return to its original
setting.
When playing a single iPod/iPhone, press
iPod a
or iPod b to switch to the respective
mode.
The following operations are possible for iPod/
iPhone, using the remote control.
When no device is connected to the selected
iPod/iPhone connector ports (iPod a or iPod b)
and this unit is not operated for 30 minutes or
more after the respective function is selected,
power will automatically turn OFF.
When playing two iPod/iPhone units
alternately, press
to perform SHUFFLE 2
play.
SHUFFLE 2
Two iPod/iPhone units can be played
alternately with no break in sound (SHUFFLE 2 ).
A bit before the currently playing iPod/iPhone
track ends, playback begins on the other iPod/
iPhone track and the volume is gradually
raised to fade in seamlessly (Cross fade).
During the SHUFFLE
2 operation, the order of
track playback is set by the shuffle function.
1 Connect two iPod/iPhone units to the
iPod/iPhone connector ports (iPod a, iPod b),
then press iPod a or iPod b.
2 Press MENU to access the iPod/iPhone
menu.
3 Select the track area that you want to
play back, then press ENTER.
4 Press .
The SHUFFLE 2 mode is set, and the SHUFFLE 2
indicator lights; the unit connected to the iPod
a
connector port will playback.
A bit before the currently playing iPod/iPhone
track ends, the other iPod/iPhone unit begins
cross fade playback. The same operation is
repeated thereafter until all tracks on both
units have been played. 2
• To cancel the SHUFFLE 2 mode, press either
once again, or .
• The SHUFFLE 2 mode will also be canceled
if the function is switched to any another
input (including iPod a or iPod b).
Note
1 These adjustments are applied to all inputs to the unit.
Button What it does
/ Starts normal playback and pauses/
unpauses playback.
 Pauses playback.
 Press to skip to the start of the current
file, then previous files. Press and hold
to start fast reverse scanning.
 Press to skip to the next file. Press and
hold to start fast forward scanning.
VOLUME
+/– Use to set the listening volume.
SHUFFLE The currently selected iPod/iPhone
tracks are played back in random
order (shuffle play).
REPEAT The currently selected iPod/iPhone
tracks are played back repeatedly.
MENU Use to access the iPod/iPhone
menu.
//
ENTER Use to control the iPod/iPhone
menu.
2 During Cross Fade operation, /, and / are deactivated.
XW-NAC1_SYXJ.book 11 ページ ２０１０年３月１０日 水曜日 午前１１時４６分