Pioneer AVIC-F20BT - Manual (Page 126)

4 Touch [Display] to change the setting to
“On”.
p If you do not want to display the POI icon
on the map, touch [ Display] to turn it
“Off”. (Even if “Display” is turned “Off”,
the POI selection setting is retained.)
5 Touch [Custom POI].
The list of POI categories appears.
6 Touch the items you want to display.
7 To finish the selection, touch [OK].
Changing
“View Mode”
Various types of screen displays can be se-
lected for navigation guidance.
= For details of the operation, refer to Switch-
ing the view mode on page 25.
Setting the map colour change
between day and night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map colour.
1 Display the
“Map Settings” screen.
= For details, refer to Displaying the “Map
Settings ” screen on page 122.
2 Touch [Day/Night Display].
Each time you touch the key changes that set-
ting.
! Automatic (default):
You can change the colours of a map be-
tween daytime and nighttime according to
whether the vehicle lights are on or off.
! Day:
The map is always displayed with daytime
colours.
p To use this function with “Automatic”, the
orange/white lead of the navigation system
must be connected correctly.
Changing the road colour
You can set the road colour to bluish or red-
dish.
1 Display the
“Map Settings” screen.
= For details, refer to Displaying the “Map
Settings ” screen on page 122.
2 Touch [Road Colour].
Each time you touch the key changes that set-
ting.
! Red (default):
Changes to red based road colours.
! Blue:
Changes to blue based road colours.
Engb
126
Chapter
26 Customising preferences