Pioneer X-EM21V - Manual (Page 16)

Playing 05
16
En
Searching by time or title/chapter/
track number
1 During playback, press GOTO.
2 Press
/ to highlight the title number,
chapter number, track number, or time field.
3 Use the numeric buttons to enter the
number or time digits.
4 Press ENTER to confirm.
Playback starts automatically.
• Depending on the disc or source, this may not operate.
Program play
You can program the playback order on the TV screen.
• Program play is not possible when the input source is a
DVD.
1 Press  to stop playback.
2 Press PROG to enter the program setting
mode.
3 Press
/// to select a number in the
program.
4 Use the numeric buttons to select the
desired track/file.
5 Repeat steps 3 to 4 to select and store other
desired tracks/files in this way.
You can select up to 16 tracks/files.
• To erase the entire program, then select [CLEAR], and
press ENTER.
6 Press  to start playback.
• Only audio files within the same source can be
programmed.
• If you press REPEAT during programmed playback, the
current track or all programmed tracks/files is/are
played repeatedly. The [REPEAT] and [PROG.] icons
appear on the main display.
• The program is automatically cleared as soon as the disc
tray is opened.
Adjusting sound
You can adjust the volume level and select sound effects.
Function Action
Increase/decrease the
volume level
Turn the volume knob towards VOLUME
(on main unit) or press VOL +/– (on
remote control) to increase or decrease
the volume.
When the power is turned off (to the
standby mode) with the volume set high,
the volume is set to a moderate level
when the power is turned back on.
Select a preset sound
effect (ROCK, JAZZ,
POP
and CLASSIC)
Press EQ repeatedly.
Enable/disable the
P.BASS feature
Press P.BASS.
Mute/unmute the
speakers
Press MUTE.
X-EM21V_SYXE8_En.book Page 16 Tuesday, July 31, 2012 9:43 AM