Pioneer VSX-2021 - Manual (Page 47)

En 47
08 Control with HDMI function
% Press on the remote control,
then press PQLS to select the PQLS
setting.
The setting is displayed on the front panel
display.
! PQLS AUTO – PQLS is enabled. A precision
quartz controller in this receiver eliminates
distortion caused by timing errors (jitter),
giving you the best possible digital-to-analog
conversion when you use the HDMI interface.
This is valid as an HDMI function for PQLS-
compatible players.
! PQLS OFF – PQLS is disabled.
Cautions on the Control with
HDMI function
! Connect the TV directly to this receiver.
Interrupting a direct connection with other
amps or an AV converter (such as an HDMI
switch) can cause operational errors.
! Only connect components (Blu-ray Disc
player, etc.) you intend to use as a source to
the HDMI input of this receiver. Interrupting
a direct connection with other amps or an
AV converter (such as an HDMI switch) can
cause operational errors.
! When Control is set to ON, HDMI Input
in The Input Setup menu on page 28 is
automatically set to OFF.
! When the receiver’s Control is turned ON,
even if the receiver’s power is in the standby
mode, it is possible to output the audio and
video signals from a player via HDMI to
the TV without producing sound from the
receiver, but only when a Control with HDMI-
compatible component (Blu-ray Disc player,
etc.) and compatible TV are connected. In this
case, the receiver’s power turns on and the
power and HDMI indicators light.