Pioneer VSX-2021 - Manual (Page 57)

En 57
10 Controlling the rest of your system
5 Repeat steps 3 to 4 to program a
sequence of up to five commands.
If you press RCU SETUP before programming is
completed, commands programmed up to that
point will be stored.
6 Press RCU SETUP to exit the
programming mode.
Using multi operations
1 Press MULTI OPERATION.
Release the button after the LED flashes once.
The LED continues to flash.
2 Within five seconds, press an input
function button that has been set up with
a multi operation.
The receiver switches on (if it was in standby)
and the programmed multi operation is per-
formed automatically.
Using System off
1 Press MULTI OPERATION.
Release the button after the LED flashes once.
The LED continues to flash.
2 Within five seconds, press u SOURCE.
The command sequence you programmed will
run, then all Pioneer components will switch
off, followed by this receiver (switch of all the
zones becomes off).
! In order to avoid accidently switching off a
DVD recorder that is currently recording, no
DVD recorder power off codes are sent.
Erasing the settings for the
multi-operation
This erases all the settings programmed in the
remote control for the multi-operation.
1 Press and hold RCU SETUP, then press
‘8’ for three seconds.
Release the button after the LED flashes once.
The LED continues to flash.
! To cancel the preset setup mode press
RCU SETUP.
2 Press the input function button
containing the program you want to
cancel or the u SOURCE button for three
seconds.
If the LED lights for one second, the erasing has
been successfully completed.
Resetting the remote control
settings
Use this procedure to reset all the remote con-
trol’s settings to the factory default.
! When preset codes are set, all the signals
learned in the input function buttons are
cleared. This function is convenient when you
want to reset some but not all of input function
buttons.
1 Press and hold RCU SETUP, then press
‘0’ for three seconds.
Release the button after the LED flashes once.
The LED continues to flash.
2 Press and hold the ENTER button for
three seconds.
If the LED lights for one second, the erasing has
been successfully completed.
Default preset codes
Input function button Preset code
DVD 2246
BD 2248
DVR/BDR 2238
HDMI 2247
TV/SAT 0186
CD 5066
VIDEO 1077
TV CTRL 0186
Controlling components
This remote control can control components after entering the proper codes (see Setting the remote
to control other components on page 54 for more on this). Use the input function buttons to select
the component.
! The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to the
TV CTRL button. If you have two TVs, assign the main TV to the TV CTRL button.
ZONE 2 ZONE 3 LIGHT
RECEIVER
D.ACCESS
CH LEVEL A.ATT DIMMER
SIGNAL SEL MCACC SLEEP
TV / DTV MPX PQLS
PHASE CTRL THX STATUS
PGM STEREO
iPod CTRL
HOME MENU TUNE
TUNE TOOLS LIST
CH
TV CONTROL
INPUT
INPUT SELECT
iPod
USB OPTION
TUNER VIDEO
ADPT HMG
SAT
CD TV
RCU SETUP
SOURCE RECEIVER MULTI OPERATION
BDR
BD DVD DVR HDMI
RECEIVER TV CTRL
MUTE
MASTER VOLUME
VOL
PRESET
TOP MENU BAND GUIDE T.EDIT
VIDEO PARAMETER AUDIO PARAMETER
ENTER PRESET
RETURN PTY SEARCH
STANDARD MENU ADV SURR AUTO / ALC / DIRECT
AUDIO HDMI OUT
INFO
CLASS
ENTER
DISP
HDD DVD
5 4 6
8
0
7 9
1 3
/ CLR
CH
222