Pioneer AVIC-HD3-II - Manual (Page 11)

Blue (*6)
Blue (*7)
To auto-aerial relay control terminal. If the vehicle has a glass
aerial, connect to the aerial booster power control terminal (max.
300 mA 12 V DC).
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect *6 and
*7 when Pin 5 is an aerial control type. In other
types of vehicle, never connect *6 and *7.
(*8)
The navigation unit
Yellow/black (MUTE)
If you use an equipment with mute function, connect that equipment to the
Audio Mute lead. If not, keep the Audio Mute lead free of any connections.
Power cord
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see the operation manual.
- voice guidance of the navigation
- incoming ringtone and incoming voice of the mobile phone that is
connected to this navigation system via Bluetooth wireless technology
RCA connector 1
16 cm
Note
Note
The aerial will automatically retract or turn off, yet the timing varies
depending on the setting.
Connecting the System
Engb
11
English
Section
02