05 preparation, Preparation 05, Preparation – Pioneer PDP-507XA User Manual

Page 15: Installing the plasma television, Moving the plasma television

Advertising
background image

15

En

Preparation

05

En

gl

is

h

Preparation

Installing the Plasma Television

Location

• Avoid direct sunlight. Maintain adequate ventilation.

• Because the Plasma Television is heavy, be sure to have

someone help you when moving it.

CAUTION

• If you do not leave sufficient space above the Plasma

Television, it will not receive enough ventilation and will not
operate properly.

NOTE

• Allow enough space around the upper and back parts when

installing to ensure adequate ventilation of the rear of the
unit.

Using the optional PIONEER stand

• For details on installation, refer to the instruction manual

supplied with the stand.

Using the optional PIONEER speakers
(for PDP-507XA only)

• For details on installation, refer to the instruction manual

supplied with the speaker.

CAUTION

Operating Environment

Operating environment temperature and humidity:
+0 °C to +40 °C; less than 85 % RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or strong
artificial light)

Moving the Plasma Television

(for PDP-507XA only)

Under speaker

NOTE

• Do not use the speaker to support the weight of the Plasma

Television.

• Always remove the speakers before moving the Plasma

Television. Do not hold the Plasma Television by the speaker
mounting fittings.

Side speaker

NOTE

• Do not hold by the side speaker.

Over 50 cm

Over
10 cm

PDP507XA.book Page 15 Tuesday, June 20, 2006 1:44 PM

Advertising
This manual is related to the following products: