Using pi seek 15, Using auto pi seek for preset, Stations 15 – Pioneer DEH-P77MP User Manual

Page 15: Limiting stations to regional, Programming 15, Using pi seek, Using auto pi seek for preset stations, Limiting stations to regional programming

Advertising
background image

different station in the same network which is

broadcasting a stronger signal.

! AF is on as a default.

1 Press FUNCTION to select AF.

Press FUNCTION until AF appears in the dis-

play.

2 Press ROTARY ENCODER to turn AF on

or off.

Press ROTARY ENCODER repeatedly to turn

between the following settings:

AF :ON (on)AF :OFF (off)

Notes

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-
quency from the stations AF list. (This is only
available when using presets on the FM1 or
FM2 bands.) No preset number appears on
the display if the RDS data for the station re-
ceived differs from that for the originally
stored station.

! Sound may be temporarily interrupted by an-

other program during a AF frequency search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the unit fails to find a suitable alternative fre-

quency, or if you are listening to a broadcast

and the reception becomes weak, the unit will

automatically search for a different station

with the same programming. During the

search, PI SEEK is displayed and the output is

muted. The muting is discontinued after com-

pletion of the PI Seek, whether or not a differ-

ent station is found.

Using Auto PI Seek for preset

stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 43.

Limiting stations to regional

programming

When AF is used to automatically retune fre-

quencies, the regional function limits the se-

lection to stations broadcasting regional

programs.

1 Press FUNCTION to select REGION.

Press FUNCTION until REGION appears in the

display.

2 Press ROTARY ENCODER to turn the re-

gional function on or off.

Press ROTARY ENCODER repeatedly to turn

between the following settings:

REGION :ON (on)REGION :OFF (off)

Notes

! Regional programming and regional networks

are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).

! The preset number may disappear on the dis-

play if the tuner tunes in a regional station
which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

RDS

En

15

English

Section

05

Advertising