Disc 22, Pausing cd playback, Selecting the search method – Pioneer DEH-P77MP User Manual

Page 22: Searching every 10 track in the current disc, Built-in cd player

Advertising
background image

1 Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the

display.

2 Press ROTARY ENCODER to turn scan

playon or off.

Press ROTARY ENCODER repeatedly to turn

between the following settings:

SCAN :ON (on)SCAN :OFF (off)

! SCAN :ON  The first 10 seconds of each

track is played.

! SCAN :OFF  The track will continue to

play.

# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.

Note

After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of

the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

2 Press ROTARY ENCODER to turn pause

on or off.

Press ROTARY ENCODER repeatedly to turn

between the following settings:

PAUSE :ON (on)PAUSE :OFF (off)

! PAUSE :ON  Play of the current track

pauses.

! PAUSE :OFF  Play will resume at the same

point that you turned pause on.

Selecting the search method

You can switch the search method between

fast forward/reverse and searching every 10

track.

1 Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the

display.

# If the search method ROUGH SRCH has been
previously selected, ROUGH SRCH will be dis-
played.

2 Rotate ROTARY ENCODER to select the

search method.

Rotate ROTARY ENCODER until the desired

search method appears in the display.

! FF/REV  Fast forward and reverse
! ROUGH SRCH  Searching every 10

track

Searching every 10 track in

the current disc

If a disc contains over 10 tracks, you can

search every 10 track. When a disc contains a

lot of tracks, you can roughly search the track

you want to play.

1 Select the search method

ROUGH SRCH.

Refer to Selecting the search method on this

page.

2 Rotate and hold ROTARY ENCODER to

search every10 track in a disc.

# If a disc contains less than 10 tracks, rotating
and holding clockwise recalls the last track of a
disc. Also, if the remaining number of tracks after
searching every 10 tracks are less than 10, rotat-
ing and holding clockwise recalls the last track of
a disc.

Built-in CD Player

En

22

Section

06

Advertising