Pioneer AVH-P4100DVD - Manual (Page 75)

TV tuner
Basic Operations
2 2 2 1 1 1 3 3 3 4 4 4
You can use this unit to control a TV tuner (e.g.
GEX-P5700TVP), which is sold separately.
For details concerning operation, refer to the
TV tuner
’s operation manual. This section pro-
vides information on TV operations with this
unit, which differs from that described in the
TV tuner
’s operation manual.
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Preset number indicator
Shows which preset has been selected.
4 Channel indicator
Shows which channel the TV tuner is tuned.
1 Touch the source icon and then touch
TV to select the TV.
# When the source icon is not displayed, you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch Band to select a band.
Touch Band repeatedly until the desired band
is displayed, TV1 or TV2.
4 To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press-
ing c or d (TRACK).
5 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
# You can also perform seek tuning by pressing
and holding c or d (TRACK).
Storing and recalling broadcast
stations
You can easily store up to 12 broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Touch List to display the preset list.
2 When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01 to P12 until the
beep sounds.
The selected broadcast station has been
stored in memory.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# When P01 to P06 and P07 to P12 are not dis-
played, you can display them by touching
List.
# You can also use a and b to recall stations
assigned to preset tuning keys
P01 to P12.
Introduction to advanced
operations
1 Touch AV Menu and then touch
Function Menu to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2 Touch ESC to return to the TV picture.
# To return to the previous display, touch Back.
Available accessories
En
75
Section
19
A
vailable
accessories