Pioneer RS-D7RII - Manual (Page 63)

• To cancel a road traffic flash or transport flash interruption and return to
the original source, press the TA button during an announcement interrup-
tion.
Note:
• You can also switch in order between interrupting announcements. (Refer to “Switching interrupt-
ing announcements” on page 65.)
7 TP alarm function
When the following conditions arise, the “
3
TRAFFIC ” indicator turns to “T”, and after 30
seconds, the TP alarm beeps for 10 seconds, reminding you to select a service component
supporting road traffic flash and transport flash.
• When road traffic flash and transport flash interruption setting is ON.
• When the service follow function is ON.
• When this unit (during DAB reception) cannot clearly receive a service component sup-
porting road traffic flash and transport flash.
• When this unit RDS cannot receive a TP or enhanced other network’s TP station broad-
cast.
• When listening to a DAB broadcast, after hearing the TP alarm, you should
re-tune to a service that supports road traffic flash and transport flash if you
want to continue the possibility to receive them.
When listening to any other sources, 30 seconds after the “
3
TRAFFIC ” indicator turns to
“T”, search automatically starts for a service component in that area that supports road
traffic flash and transport flash.
63
DAB Tuner Operation