Pioneer VSX-D810S - Manual (Page 19)

19
En
Preparations
Component input 1 setting
Tells the receiver which device (DVD player, etc.) is
connected to this input.
Press
% or fi to select the component setting
(DVD, TV, VCR or OFF).
MEMO:
• The initial setting is “
DVD ”.
Component input 2 setting
Tells the receiver which device (TV, etc.) is connected to
this input.
Press
% or fi to select the component setting
(TV, VCR, OFF or DVD).
MEMO:
• The initial setting is “
TV ”.
Multi Channel External Decoder
Surround Back ch1/ch2 setting (VSX-
D810S only)
You only need to make this setting if you are using a
multi channel external decoder with your DVD player. If
you aren’t just ignore this setting.
Press
% or fi to select the channel setting.
Select ch1 if your DVD is outputting 6.1
sound (the surround back channel is mono)
or select ch2 if your DVD is outputting 7.1
sound (the surround back channel is stereo).
MEMO:
• The initial setting is “
ch1 ”.
Coaxial digital input setting
Here you tell the receiver what component you have
hooked up to the coaxial digital input jack.
Press
% or fi to select the coaxial digital
input (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign the component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is “
DVD ”.
Optical digital input 1 setting
Here you tell the receiver what component you have
hooked up to the optical input jack 1.
Press
% or fi to select the optical digital
input 1 (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is “
CD” .
Optical digital input 2 setting
Here you tell the receiver what component you have
hooked up to the optical input jack 2.
Press
% or fi to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is “
CD-R ”.
Optical digital input 3 setting (VSX-
D810S only)
Here you tell the receiver what component you have
hooked up to the optical input jack 3.
Press
% or fi to select the optical digital
input 3 (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack,
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is “
TV ”.