Pioneer VSX-D810S - Manual (Page 42)

42
En
Controlling the Rest of Your System
Cable TV/Satellite TV/TV Controls
This remote control can control these components after entering the proper codes or teaching the receiver the
commands (see p.37-39).
Use MULTI CONTROL buttons to put the remote control in the stated mode.
MEMO:
• The first four buttons for the VSX-D710S/D810S are dedicated to control the TV assigned to the
TVC button. Thus
if you only have one TV to hook up to this system assign it to the TVC MULTI CONTROL button. If you have two
TVs, assign the main TV to the TVC button. If you hook up your system this way, the first four TV controls will
always be accessible.
Button(s) Function Components
TV Press to switch the TV or CATV between STANDBY and ON. Cable TV/ Satellite TV/ TV
TV FUNC
Press to switch the TV input. (Not possible with all models. If it doesn't work
with the preset code, use the learning feature.)
TV
CHANNEL
+/
−
Select channels. Cable TV/ Satellite TV/ TV
TV VOL +/
−
Adjust the TV volume. Cable TV/ Satellite TV/ TV
4
Move to lower numbered channels Cable TV/ Satellite TV/ TV
¢ Use to move to higher numbered channels Cable TV/ Satellite TV/ TV
Number
Buttons
Use to select a specific TV channel. Cable TV/ Satellite TV/ TV
MENU Select the menu screen. Cable TV/ Satellite TV/ TV
@#%fi &
ENTER
Press to select or adjust and navigate items on the menu screen. Cable TV/ Satellite TV/ TV
EFFECT +/
−
For TV and cable TV use this button to immediately enter a new channel
(CHANNEL ENTER function). For satellite TV use this button to exit the
menu screen.
Cable TV/ Satellite TV/ TV