Pioneer KRL-37V - Manual (Page 16)

Quick guide
Supplying power to the antenna
You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
Press h and the “HOME MENU” screen displays.
Press a/b to select “Setup”.
Press a/b to select “Antenna Setup-DIGITAL”, and
then press ENTER.
Press
a/b to select “Supply Voltage”, and then press
ENTER .
Press c/d to select “On”, and then press ENTER.
1
2
3
4
5
Before turning on the power
Bundling the cables
(For U.K. and Eire)
14
Carefully insert the
CA Module in the
Common Interface
slot with the contact
side forward.
The logo on the CA
Module must be
facing forward from
the rear of the TV. 1
2
Cable clamp
Bundle the cables with
the clamp.
AC cord
Place the TV close
to the AC outlet, and
keep the power plug
within reach.
Standard DIN45325 plug (IEC 169-2) 75 q
coaxial cable
(For Europe, except
U.K. and Eire)
KRL3237V_GB.indd 14 KRL3237V_GB.indd 14 2008/06/13 14:49:45 2008/06/13 14:49:45