Pioneer KRL-37V - Manual (Page 38)

You can use this menu to set the appropriate picture
size for viewing a 16:9 format TV programme on a 4:3
TV.
REC Picture Size
Digital Setup
Setting to “4:3 TV” Setting to “16:9 TV”
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the INPUT4, 5 and 6 terminals.
Other picture and audio settings
Adjusting image position
HDMI Auto View
Setup
NOTE
This function must be set before recording.
Selecting the HDMI picture size
automatically
•
Position
Setup
For adjusting a picture’s horizontal and vertical
position.
NOTE
Adjustments are stored separately for each input source.
Depending on the input signal type or SCREEN SIZE
setting, a position setting may not be available. •
•
DNR
Option
“DNR” (Digital Noise Reduction) produces a clearer
image (“Off”, “High”, “Low”).
Automatic volume adjustment
Auto Volume
Option
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Emphasising dialogue
Clear Voice
Option
This function emphasises speech against background
noise for greater clarity. It is not recommended for
music sources.
Outputting audio only
Audio Only
Option
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Useful Viewing functions
Selecting the recording picture
size manually
H-Pos.: Centres the image by moving it to the left or
right.
V-Pos.: Centres the image by moving it up or down.
Reducing noise on the screen
Off: Both screen images and audio are output.
On: Audio is output without a screen image.
36
Item
Item
KRL3237V_GB.indd 36 KRL3237V_GB.indd 36 2008/06/13 14:50:29 2008/06/13 14:50:29