Pioneer DVR-520H-S - Manual (Page 100)

The Initial Setup menu 13
100
En
Note
• You can fine-tune individual stations using the
Manual CH Setting feature. See Manual CH Setting
below for how to use this.
Auto Channel Setting : Download from TV
If you connected this recorder to your TV using the
AV1(RGB)-TV AV connector, and if your TV supports this
function, you can download all the channels that your TV
is tuned to. Check your TV’s instruction manual for more
details.
1 Choose ‘Download from TV’.
2 Select your country.
3 Press ENTER to start downloading.
After downloading has finished, the channel mapping
screen appears showing which channels have been
assigned to which program numbers.
Tip
• If the channel tuning information is updated in the
TV, the recorder will automatically download the new
information.
Manual CH Setting
The channel skip function lets you skip channels where
there is no station so that as you change channels using
the
CHANNEL +/– buttons or the number buttons, you
only change to channels that have a station.
The manual tuning function allows you to manually tune
to stations, should you need to.
1 Select ‘Manual CH Setting’, then ‘Next Screen’.
Press ENTER to go to the country setting screen.
2 Select your country.
3 Press ENTER to go to the manual channel setting
screen.
• Use the CHANNEL +/– buttons or the number
buttons to change channels.
From this screen there are eight parameters you can set:
• Skip – If you want to skip the displayed channel
(because there is no station assigned to that
channel), change the
Skip setting to On .
• CH System – Set the channel system used in your
area or region.
• Channel – Change the channel number assigned to
the current preset.
• AFT (Auto Fine Tune) – When set to On , the station is
automatically tuned; set to Off to manually fine tune
(see below).
• Level – Set the AFT level (see above).
• Sound System – Set the sound system used for the
current channel.
• Name – Move the cursor right then input a name for
the current station, (up to five characters) then press
ENTER .
• Decoder – If the current channel is scrambled,
requiring a decoder connected to the AV2/AUTO
START REC (INPUT 1/DECODER) connector, set this
to On . (See also AV2/L1 In on page 102.)
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
ShowView CH Setting Auto Scan
Download from TV
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
ShowView CH Setting Auto Channel Setting Auto Channel Setting
Country Austria
Initial Setup
Downloading
Cancel
Pr 5
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
ShowView CH Setting Next Screen
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
ShowView CH Setting
Manual Channel Setting
Manual Channel Setting
Country Austria
Initial Setup
Off Skip
CH System
Channel
AFT
Level
Sound System
Name
Decoder
Western Euro
2
On
B/G
Off
Pr 1
DVR-04_HDD_EU.book 100 ページ ２００４年４月１１日 日曜日 午後１時４５分