Pioneer DVR-520H-S - Manual (Page 103)

The Initial Setup menu 13
103
En
English
• Decoder – Use this setting if you are using a decoder
connected to the AV2/AUTO START REC (INPUT 1/
DECODER) input. (For scrambled channels, make
sure that the manual channel Decoder setting is set
to On —see also Manual CH Setting on page 100).
Note that on this setting, it is not possible to use Auto
Start Recording.
Note
• When the Input Line System setting is set to 525
System , RGB can’t be selected.
• When the Input Line System setting is set to 625
System , RGB can be selected, but if the Input Line
System is then changed to 525 System , the AV2/L1
In setting automatically changes to Video .
• See also Input Line System on page 98.
NTSC on PAL TV
• Default setting: On
When set to On , NTSC discs (from the U.S., for example)
will play correctly on a PAL-only TV. Change to Off if your
TV is already NTSC-compatible.
Depending on this setting and the Input Line System
setting (see
Input Line System on page 98), the signal
format output when the recorder is stopped varies as
shown in the table below.
Note
• Many recent PAL TVs are capable of correctly
displaying NTSC pictures without the need for this
setting. Check the manual that came with your TV if
you’re not sure whether yours has this feature.
Audio In settings
NICAM Select
• Default setting: NICAM
If you want to record the non-NICAM audio in a TV
broadcast, select
Regular Audio , otherwise set to
NICAM . (When set to NICAM , you can still select
Regular Audio using the AUDIO button. See Changing
audio channels on page 29.)
Tuner Level
• Default setting: Normal
Set to Compression if the audio level from the built-in
tuner is excessively high causing distortion.
External Audio
• Default setting: Stereo
If the external source is standard stereo, leave set to
Stereo . If each channel carries a separate soundtrack,
change to Bilingual .
When the external audio is from the DV input, an audio
subcode channel within the DV audio tells the recorder
whether the audio is stereo or bilingual. This has priority
over the setting you make here.
Input Line System
NTSC on PAL
TV Output when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Input Colour System
AV1 Out
AV2/L1 In
NTSC on PAL TV On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2) NICAM
Regular Audio
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2) Normal
Compression
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2) Stereo
Bilingual
Initial Setup
DVR-04_HDD_EU.book 103 ページ ２００４年４月１１日 日曜日 午後１時４５分