Pioneer CNSD-210FM - Manual (Page 33)

Using the equaliser
The equaliser lets you adjust equalisation to
match vehicle interior acoustic characteristics
as desired.
Recalling equaliser curves
There are seven stored equaliser curves that
you can easily recall at any time. Here is a list
of the equaliser curves:
Equaliser curve
S.Bass (Super Bass) is a curve in which only low-
pitched sound is boosted.
Powerful is a curve in which low-pitched and high-
pitched sounds are boosted.
Natural is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equaliser curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
AV sources.
p When “Flat” is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
“Flat” and a set equaliser curve.
1 Touch [EQ].
2 Touch the equaliser you want.
Adjusting the preset equaliser curve
effect
You can adjust the effect of the preset equali-
ser curves.
The following equaliser curves can be ad-
justed:
! S.Bass
! Powerful
! Natural
! Vocal
1 Touch [EQ].
2 Touch the equaliser you want.
3 Touch [+] or [
–] next to “Nuance”.
p The level can be adjusted in the range of –6
to +6.
p If “Natural” is selected, the level can be ad-
justed in the range of
–4 to +6.
Customising the equaliser curves
You can adjust the currently selected equaliser
curve setting as desired. Adjustments can be
made with a 7-band graphic equaliser.
The difference between
“Custom1” and
“Custom2”
! A separate “Custom1” curve can be cre-
ated for each source. If you make adjust-
ments when a curve
“S.Bass (Super Bass)”,
“Powerful”, “Natural”, “Vocal”, “Flat”, or
“Custom1” is selected, the equaliser curve
settings will be memorised in
“Custom1”.
! A “Custom2” curve can be created com-
mon to all sources. If you make adjust-
ments when
“Custom2” curve is selected,
the
“Custom2” curve will be updated.
! The “Custom1” curve is applied to each of
the source selected, but you can apply the
same curve to the following sources.
— CD, ROM, DVD-V, DVD-VR, DivX
— AM and FM
— EXT1 and EXT2
— AV1 and AV2
— SD and USB
Engb
33
Chapter
06
Playing
a
DVD-VR
disc
Playing a DVD-VR disc