Pioneer DCS-240 - Manual (Page 37)

Additional information 09
37
En
English
Français
Deutsch
Nederlands
Italiano
Español
TV system setting
The default setting of this system is AUTO , and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO . If you find picture distortion with
some discs, set the TV system to match your
country or region’s system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting ( AUTO , PAL and NTSC ).
1
1 Switch the unit into standby, then press
SHIFT+SYSTEM SETUP .
2 Use / (cursor left/right) to choose TV
SYS then press ENTER .
The TV system changes as follows:
• AUTO NTSC
• NTSC PAL
• PAL AUTO
The system automatically switches on and
you’ll see the new TV system setting in the
display after seeing WELCOME . 2
Frequency step setting
Australian model only
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1 Switch the unit into standby, then press
SHIFT+SYSTEM SETUP .
2 Use / (cursor left/right) to choose AM
9K/10K then press ENTER .
3 Use / (cursor up/down) to select AM
9K or AM 10K then press ENTER .
Note
3 • Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion.
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV
may offer various zoom and stretch options; see the instructions that came with your TV for details.
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a ‘letterbox’ style.
1 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at
the top and bottom of the screen.
Disc Player setting
Type Format NTSC PAL AUTO
DVD/Super VCD/
Video CD/DivX
Video NTSC NTSC PAL NTSC
PAL NTSC PAL PAL
CD/MP3/WMA/
JPEG/no disc — NTSC PAL NTSC or
PAL
2 You have to switch the player into standby (press STANDBY/ON ) before each change.
XV-DV232_240_131.book 37 ページ ２００４年１２月２７日 月曜日 午前９時３分