Pioneer VSX-AX5Ai-S - Manual (Page 5)

5
Operations on the Receiver and Cable Connections
To display reverberation characteristics measured with the receiver on your PC, you need to connect the
receiver to the PC.
1
Connect the receiver to your PC with a RS-232C cable.
Caution
Before making or changing connections, switch off the power and disconnect the power cord from
the power outlet. Plugging in components should be the last connection you make with your system.
VSX-AX5Ai
Note
The type of cable to use is a female-female cross cable. Different manufacturers use different names to
refer to this type of cable. Sometimes it is called an “interlink” cable, and sometimes it is called a
“reverse” cable. Refer to the following connection diagram and confirm the type of cable to be
purchased.
Pin-out diagram of RS-232C cable to connect receiver and PC
Dsub 9-pin female Dsub 9-pin female Dsub 9-pin female Dsub 9-pin female