Pioneer VSX-AX5Ai-S - Manual (Page 7)

7
Application Operations
This section explains operations that you do in the application, from receiving measurement data to
displaying graphs and saving the data.
Receiving measurement data
1
Double click the application shortcut icon on the PC desktop.
You can also start the application by selecting “Program”
= “Pioneer Corporation” = “Advanced
MCACC” from the “Start” menu.
The application starts.
2
Select “Receive” under “File” on the menu bar.
3
Select the number of the COM port to which the RS-232C cable is connected and
click “OK.”
If you do not know which COM port number to select, try selecting each port in turn, beginning with
“COM1.”
Data transmission starts. (It should finish in about 10 seconds.)
When reception finishes, graphs of the received data appear.
Notes
• Refer the operating instructions of your PC for more information about COM port settings.
• In order to avoid malfunction, after the completion of the data transmission, unplug the RS-232C cable
connecting your PC and the receiver.
COM port selection box
Troubleshooting
If an error occurs when you select “Receive” and no data is sent.