Pioneer BCS-FS515 - Manual (Page 18)

Connecting 18
C
onnecting
2
Wall mounting the speaker for
BCS-SB616
The speaker have the mounting holes which can
be used to mount the speaker on the wall.
Before mounting
y Remember that the speaker system is heavy and
that its weight could cause the screws to work
loose, or the wall material to fail to support it,
resulting in the speaker falling. Make sure that
the wall you intend to mount the speaker on is
strong enough to support them. Do not mount
on plywood or soft surface walls.
y Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
y If you are unsure of the qualities and
strength of the wall, consult a professional
for advice.
y Pioneer is not responsible for any accidents
or damage that result from improper
installation.
y When mounting the speaker on a wall,
install it so that it is parallel to the floor.
y When mounting the speaker on a wall, do
not attach the accessory speaker stands.
, > Caution
Mounting screw
(not supplied)
4 mm to 5 mm
HB516-RD1_BDEUPPK_ENG.indd 18 2011-06-02 �� 11:01:26