Pioneer BCS-FS515 - Manual (Page 23)

Connecting 23
C
onnecting
2
Wall mounting the speakers
for BCS-FS515
Before mounting
y Remember that the speaker system is heavy and
that its weight could cause the screws to work
loose, or the wall material to fail to support it,
resulting in the speaker falling. Make sure that
the wall you intend to mount the speakers on is
strong enough to support them. Do not mount
on plywood or soft surface walls.
y Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
y If you are unsure of the qualities and
strength of the wall, consult a professional
for advice.
y Pioneer is not responsible for any accidents
or damage that result from improper
installation.
, > Caution
Mounting screw
(not supplied)
5 mm to 7 mm
Attaching the speakers
The front speaker can be hung vertically or
horizontally on the wall. Use one hole to hang it
vertically and two holes to hang it horizontally. The
illustration below shows the front right speaker.
Hole
Vertical set up
Hole
110
Horizontal set up
When installing the speaker horizontally, set it up
so that the speaker terminal on the back side of the
speaker is on the outside on the end of the surface,
farthest away from the other speaker.
Front right Front left
Speaker terminal Speaker terminal
HB516-RD1_BDEUPPK_ENG.indd 23 2011-06-02 �� 11:01:28