Pioneer CDJ-2000NXS - Manual (Page 13)

13 En
Connections
Connecting to a mixer with only one LAN port
When connecting to a mixer with only one LAN port using a switching hub, in order to use rekordbox’s music file management functions to their maxi-
mum, set the channel number of the mixer to which the audio or coaxial digital cable is connected and the player number displayed at the bottom left
of the main unit display to the same number.
(Ex.: When the audio cable is connected to channel 1)
L
R
PHONO
CH 1
CD/LINE
NAL GND
PLAYER 1 CH 1
Audio cable
To change the player number, follow the procedure below.
1
Disconnect the storage device (SD, USB) and LAN cable.
2 Press the [MENU/UTILITY] button for over 1 second to display the [UTILITY] screen.
3 Turn the rotary selector to select [PLAYER No.], then press the rotary selector.
4 Turn the rotary selector to select the player number, then press the rotary selector to enter it.
5 Press the [MENU/UTILITY] button to complete the setting.
PRO DJ LINK (SD & USB Export)
! rekordbox music files and data can be exchanged with this unit using a memory device (flash memory, hard disk, etc.), eliminating the need to take
a computer into the DJ booth. Such information as playlists, cues, loops and hot cues set in advance with rekordbox can be used for playback.
POWER
CONTROL
LINK
AUDIO OUT R L CONTROL DIGITAL OUT
L R
USB
STOP
LO
•I
REC / CALL
SD
HOT CUE
Q
DJ player DJ mixer Rear panel
LAN cable LAN cable
LAN cable
Power cord
To an AC outlet
Audio cable Audio
cable
rekordbox Computer
Switching hub
USB device on
which
rekordbox data
is recorded
SD memory
card on which
rekordbox data
is recorded