Pioneer GEX-P700DAB - Manual (Page 14)

13
Basic Operation with DEH-P9100R
Changing the Display
When Ensemble is received and Service selection is possible, you can change the display
as follows:
7 Changing the Label
• Select a desired display.
Each press of the DISPLAY button changes the display in the following order:
Service Label
= Service Component Label (Service) = Dynamic Label (DAB Text)
= Ensemble Label (Ensemble)
Note:
• With a Service Component that has no Service Component Label or Dynamic Label, switching to
Service Component Label and Dynamic Label is not possible.
• With displays other than Service Label, if you do not perform an operation within 8 seconds or
press a button other than the DISPLAY button, the display returns to Service Label Indicators.
• With some Head Units, the mode changes as follows:
Service Label
= Service Component Label = Dynamic Label = PTY Label
= Ensemble Label = Service Label = ...
7 Head Unit Group 2
• Select the desired display with the
5 5/∞ ∞ buttons when you select the changing
the label mode (FUNC 1).
The mode changes as follows:
Service Label
= PTY Label = Service Component Label = Ensemble Label
= Dynamic Label = Service Label = ...
Note:
• With a Service Component that has no Service Component Label or Dynamic Label, switching to
Service Component Label and Dynamic Label is not possible.
• With Dynamic Label longer than 9 letters, you can scroll to see the rest of the text by pressing the
5 5 button for 2 seconds.
Each press changes the Display ...