Using the dab functions with avm-p9000r, Tp alarm function – Pioneer GEX-P700DAB User Manual

Page 36

Advertising
background image

7 Canceling Road Traffic Flash and Transport Flash interruptions part way through

• To cancel a Road Traffic Flash or Transport Flash interruption and return to

the original source, press the TA button during an Announcement interruption.

The announcement is canceled but the tuner remains in the TA mode until the TA button is
pressed again.

Note:

• You can also switch in order between interrupting Announcements. (Refer to “Switching

Interrupting Announcements” on the next page.)

TP Alarm Function

When the following conditions arise, the Car icon goes out, and after 30 seconds, the TP
Alarm beeps for 5 seconds, reminding you to select a Service Component supporting Road
Traffic Flash and Transport Flash.
• When Road Traffic Flash and Transport Flash interruption setting is ON.
• When the Service Follow Function is ON.
• When this unit (during DAB reception) cannot clearly receive a Service Component

supporting Road Traffic Flash and Transport Flash.

• When Head Unit RDS cannot receive a TP or enhanced other network’s TP station

broadcast.

• When listening to a DAB broadcast, after hearing the TP Alarm, you should

re-tune to a Service that supports Road Traffic Flash and Transport Flash if
you want to continue the possibility to recieve them.

When listening to any other sources, 30 seconds after the Car icon is displayed before
going out, search automatically starts for a Service Component in that area that supports
Road Traffic Flash and Transport Flash.

35

Using the DAB Functions with AVM-P9000R

Advertising