Pioneer XDJ-R1 - Manual (Page 10)

10 En
Using remotebox
Tracks on USB devices connected to this unit can be browsed and
loaded from mobile devices via wireless LAN.
1 Connect the mobile device by wireless LAN.
2 Launch remotebox on the mobile device and establish
the link.
3 Connect the USB device to this unit’s USB device
insertion slot.
4 Operate remotebox on the mobile device to select the
track.
5 Operate remotebox on the mobile device to select the
deck on which the track is to be loaded, then tap.
Track loading starts. The jog dial indicator on the deck on which the
track is being loaded flashes.
Once playback is possible, the jog dial indicator stops flashing, remain-
ing lit, the track name is displayed on the main unit display and playback
starts.
! Also see the remotebox operating instructions.
Outputting sound
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
MASTER LEVEL control Turned fully counterclockwise
TRIM control Turned fully counterclockwise
EQ (HI, MID, LOW) controls Center
Channel fader Moved forward
CROSS F. CURVE (THRU, , ) (crossfader
curve selector switch)
[THRU] position
DECK, PHONO/LINE selector switch [DECK1] position
2 Press the [f] button to play the track.
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER
OUT 2] terminals to an appropriate level.