Pioneer AVM-P8000R - Manual (Page 73)

Adjusting Audio
72
Continued overleaf.
Subwoofer Output
Switching the Subwoofer Output ON/OFF
When a Subwoofer is connected, switch Subwoofer output ON.
Initially, Subwoofer output is OFF.
The Subwoofer output phase can be switched between normal, or 0˚ (“NORMAL”), and
reverse, or 180˚(“REVERSE”). 0˚ is the default phase.
Note:
• When the Subwoofer Controller setting is “External” in the Initial Settings Menu, you cannot
switch the Subwoofer ON/OFF mode. In this case, this setting is not necessary. (See page 77.)
• Select the OFF setting when you do not want the Subwoofer to operate.
• When the Subwoofer output is OFF, you cannot change the phase of Subwoofer output.
1. Select “SUB W” by moving the joystick.
“SUB W” is highlighted in green.
2. Click the joystick.
The Audio Setting Menu appears, with “SUB W
Setting” highlighted in green.
3. Click the joystick.
and shows indicating that you are ready to
select a phase.
4. Switch the Subwoofer Output ON/OFF by
moving the joystick up/down.
5. Change the phase of Subwoofer output by
moving the joystick left/right.
6. Cancel the Subwoofer Output Setting by click-
ing the joystick.