Pioneer XDJ-AERO - Manual (Page 2)

Introduction
The Sample Launch function of XDJ-AERO allows you to select the playlists in your USB device
linked to the unit as a bank.
(This function works when the XDJ-AERO firmware is Version 2.0 or later.)
This guide illustrates the procedures from how to sample a music file using rekordbox
to how to add it to a playlist and export it to a USB device.
Preparation
1 Launch rekordbox.
2 Create a playlist for a Sample Launch bank.
How to create a Sample Launch bank
1 Play a music file.
2 Set a Loop In point at the sample head and a Loop Out point at the sample end.
* If the sample created using rekordbox is 2 seconds or longer, only 2 seconds from the sample
head can be used as a sample in the Sample Launch function.
STEP1.
Play a music file.
STEP2:
Set a Loop In point at the sample
head and a Loop Out point at the
sample end.
STEP3.
Right click while a loop is
playing and select [Save
the Loop in WAV file].
STEP4.
The saved music file is
automatically added to
the [Collection] with the
saved name.
STEP5.
Drag the music file to add the
playlist created for the bank.