Pioneer XDJ-AERO - Manual (Page 3)

3 Right-click on the enlarged waveform display on the player panel while the loop is playing
and select [Export Loop As Wav].
4 The screen named [Export Loop As Wav] is displayed.
After selecting the location to save the music file, click [Save].
Extracted loop elements are saved as WAVE files (48 kHz sampling frequency, 16-bit
quantization) and added to the rekordbox music collection. The filename specified for the
WAVE file when it was saved is displayed in the title column on the [Collection] pane.
5 Drag the saved music file from the [Collection] pane to add it to the playlist.
Take the above steps from 1 to 5 to add up to 4 files to a playlist.
The 1st through 4th files in a selected playlist on a USB device are assigned to
[FX SELECT 1 ~ 4] buttons of the Sample Launch function.
The 5th and later samples in the playlist are not displayed in the Bank Selection Screen
on this unit.
6 Connect the computer and the USB device.
7 Export the playlist to the USB device and remove it from the computer.
This is to complete creating a Sample Launch bank.
Press the SAMPLE LAUNCH button for longer than 1 second after connecting the unit
to the USB device, the created playlist can be selected as a sample bank.
・Please refer to the Operating Instructions of rekordbox (Mac/Windows) for further details
of rekordbox.
・Please refer to the Operating Instructions of XDJ-AERO for further details of the Sample
Launch function.