Changing the wide mode – Pioneer AVX-P7300DVD User Manual

Page 25

Advertising
background image

20

Operation of the Display

You can select a desired mode for enlarging a 4:3 picture to a 16:9 one.

• Select the desired mode in the following order:

Full (FULL)

= Just (JUST) = Cinema (CINEMA) = Zoom (ZOOM) = Normal

(NORMAL)

Full (FULL)

A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any omissions.

Just (JUST)

The picture is enlarged slightly at the center and the amount of enlargement increases
horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any dis-
parity even on a wide screen.

Cinema (CINEMA)

A picture is enlarged by the same proportion as FULL or ZOOM in the horizontal
direction and by an intermediate proportion between FULL and ZOOM in the verti-
cal direction; ideal for a cinema-sized picture (wide-screen picture) where captions
lie outside.

Zoom (ZOOM)

A 4:3 picture is enlarged in the same proportion both vertically and horizontally;
ideal for a cinema-sized picture (wide-screen picture).

Normal (NORMAL)

A 4:3 picture is displayed as it is, giving you no sense of disparity since its propor-
tions are the same as that of the normal picture.

Note:

• Different settings can be memorized for the AV, VTR and RGB video. In addition, different

settings can also be memorized for a component (AV) connected to the AV-BUS input.

• The Wide Mode used for menu setting is switched to Full (FULL). The Wide Mode will

return when the menu setting is deleted.

• When video is viewed in a wide mode that dose not match its original aspect ratio, it may

appear differently.

• Remember that using the wide mode feature of this system for commercial or public viewing

purpose may constitute an infringement on the author’s rights protected by the Copyright
Law.

• Video will appear roughened when viewed in CINEMA or ZOOM mode.

Changing the Wide Mode

Advertising