Pioneer AVIC-HD1BT - Manual (Page 11)

10
English
Espa
ñ
ol
Deutsch
Fran
ç
ais
Italiano
Nederlands
(*8)
Blue (*7)
To Auto-aerial relay control terminal
(max. 300 mA 12 V DC). Blue (*6)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect *6 and
*7 when Pin 5 is an aerial control type. In
other types of vehicle, never connect *6 and *7.
RCA connector 1
Yellow/black
If you use equipment with a mute function, connect that equipment to the
Audio Mute lead. If not, keep the Audio Mute lead free of any connections.
Power cord
Note:
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see the Operation Manual.
- voice guidance of the navigation
- incoming Ringtone and incoming voice of the mobile phone that is
connected to this navigation system via Bluetooth wireless technology
The navigation unit
Note:
The aerial will automatically retract, yet the timing
varies depending on the setting. (Refer to page 5.)
For more detailed information on changing the “Auto
ANT” mode, refer to “Switching the auto aerial
setting” in the Operation Manual.
Note:
Cords for this navigation system and those for other
products may be different colors even if they have
the same function. When connecting this navigation
system to another product, refer to the supplied
manuals of both products and connect cords that
have the same function.