Pioneer AVIC-HD1BT - Manual (Page 18)

17
Connecting the system
When connecting the rear display
When using a rear display connected to rear video output
NEVER install the rear display in a location that enables the driver to watch the
video source while driving.
This navigation system’s rear video output is for connection of a display to enable passen-
gers in the rear seats to watch the video source. You can switch the rear screen mode in
“AV Source Menu”. (For details, refer to the Operation Manual.)
Notes:
• The map screen navigation images output to the rear display differ from standard NTSC for-
mat images. Therefore, their quality will be inferior to the images that appear on the front dis-
play.
• The navigation system automatically switches between NTSC colour system and PAL colour
system for each video and outputs the video on the “Rear Display”. To correctly output each
type of video on the “Rear Display”, we recommend using a “Rear Display” with a function to
automatically switch between NTSC and PAL (e.g. AVD-W1100V).
The navigation unit
RCA cables
(sold separately)
To video input
To audio inputs
RCA connector 2
Yellow
(REAR MONITOR OUTPUT)
Red, white
(REAR MONITOR OUTPUT)
Rear display with
RCA input jacks