Pioneer AVIC-HD3-II - Manual (Page 6)

4
will appear on the “Front Display”.
To watch “Video image” on the “Front Display”,
park your vehicle in a safe place and apply the
handbrake.
See “Handbrake interlock” in the operation
manual for more information.
When using a display connected to
REAR MONITOR OUTPUT
• NEVER install the “Rear Display” in a loca-
tion that enables the driver to watch
“Video image” while driving.
This navigation system’s REAR MONITOR
OUTPUT is for connection to a display to enable
passengers in the rear seats to watch “Video
image”.
ò Setting the source to rear source Þ operation
manual
r The map screen navigation images output to
the “Rear Display” differ from standard NTSC
format images. Therefore, the quality will be
inferior to the images that appear on the
“Front Display”.
r The navigation system automatically switches
between the colour system (NTSC, PAL,
SECAM) for each video and outputs the video
on the “Rear Display”. To correctly output
each type of video on the “Rear Display”, we
recommend using a “Rear Display” with a
function to automatically switch the colour
system (e.g. AVD-W7900).
About rear view camera
With an optional rear view camera (sold sepa-
rately), you can use the navigation system as an
aid to keep an eye on trailers, or while backing
up.
• SCREEN IMAGE MAY APPEAR
REVERSED.
• USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY
OR DAMAGE.
• The rear view camera function is to be
used as an aid to keep an eye on trailers, or
while backing up. Do not use for entertain-
ment purposes.
• Please note that the edges of the rear view
camera images may differ slightly accord-
ing to whether full screen images are dis-
played when backing up, and whether the
images are used for checking the rear
when the vehicle is moving forward.