Pioneer PDK-WM02 - Manual (Page 10)

10
En
Checking the Parts
Check the parts before beginning assembly.
Note
Screws used to fix the wall-hanging metal fitting firmly to
the wall surface are not included. Purchase these separately.
Philips driver separately.
Operating instructions
(this document) x 1
Hung on wall unit x1
Hexagon wrench x 1
(Opposite side 6 mm for M8 use)
Bolts M8 x 6
Stencil x 1
Installation Procedure
1
Removing the screws from the top and
bottom of the Hung on wall unit (4 loca-
tions: top and bottom, left and right side).
Note
Be careful not to lose the 2 anchor screws (M5 x 10mm)
because they will be used later.
Removing the
screws.
2
Removing the PDP side metal fitting from
the wall side metal fitting.
Wall side
metal fitting
PDP side
metal fitting
1
Ja
取扱説明書
Operating instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Manual de instrucciones
壁掛け型プラズマディスプレイ金具
HUNG ON WALL UNIT
ECRAN MURAL
WANDBEFESTIGUNGSEINHEIT
UNITA
' DA PARETE
EENHEID VOOR WANDBEVESTIGING
UNIDAD PARA COLGAR DE LA PARED
PDK-WM02
「据付工事」について 本機は十分な技術・技能を有する専門業者が据え付けを
行うことを前提に販売されているものです。据え付け・取
り付けは必ず工事専門業者または販売店にご依頼くださ
い。
なお、据え付け、取り付けの不備、誤使用、改造、天災な
どによる事故損傷については、弊社は一切責任を負いま
せん。
Removing
the screws.