Pioneer PDK-WM02 - Manual (Page 13)

13
En
Installation Procedure
When removing the plasma display
Before beginning this procedure, remove the power
plugs of the plasma display and peripheral devices
from their outlets. As necessary also remove
connecting cables.
1
Removing screws fixing the PDP side
metal fitting.
Plasma display
2
After slightly raising the plasma display
once (1
1 1 1 1), raise it upwards to the left (2)
till you cannot raise it any higher. You can
remove it by pulling it towards yourself in
this position (3
3 3 3 3).
~
Ÿ
!
~
Ÿ
!
~
Ÿ
!
~
Ÿ
!
Caution
Always have at least two people do this task.
Caution