Selecting audio output 30, Using compression 30, Playing songs on ipod – Pioneer AVH-P4000DVD User Manual
Page 30: Basic operations 30, Operating this unit
3
When you find the desired track (or
folder) touch SCAN again.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Selecting audio output
When playing DVD video discs recorded with
LPCM audio, you can switch the audio output.
When playing Video CD discs, you can switch
between stereo and monaural audio output.
! This function is available for DVD and
Video CD.
! This function is not possible when disc
playback has been stopped.
! If you select Linear PCM, when playing a
disc recorded on a dual mono mode, you
can operate this function. (Refer to Setting
for digital output on page 41.)
% Touch L/R SELECT on the function menu
to select the audio output.
Touch
L/R SELECT repeatedly until the desired
audio output appears in the display.
! L+R – left and right
! LEFT – left
! RIGHT – right
! MIX – mixing left and right
Note
Depending on the disc and the playback location
on the disc, the function may not be selectable,
indicating that operating this function is not pos-
sible.
Using compression
Using the COMP (compression) function lets
you adjust the sound playback quality of this
unit.
% Touch COMPRESSION on the function
menu to select your favorite setting.
OFF
—COMP1—COMP2
Playing songs on iPod
Basic Operations
You can use this unit to control an iPod by
using a cable (e.g., CD-I200), which is sold se-
parately.
3
3
3
2
2
2
1
1
1
6
6
6
5
5
5
4
4
4
7
8
1 Source icon
2 Repeat indicator
Shows when repeat range is set to
ONE or
ALL.
3 Song number indicator
4 Title indicator
5 Shuffle indicator
Shows when random play is set to
SONGS or
ALBUMS.
6 Play time indicator
7 Song information
Shows detailed information of currently play-
ing song.
8 Battery charging indicator
Shows when the battery charge setting is on.
1
Connect the iPod to this unit.
Playback will automatically start.
While connected to this unit,
PIONEER, Acces-
sory Attached or
(check mark) is displayed
on the iPod.
# Before connecting the dock connector of this
unit to the iPod, disconnect the headphones from
the iPod.
# Depending on the model of iPod or the data
size in the iPod, there may be a delay to start play-
ing after connection.
# After the iPod has been connected to this
unit, use touch panel keys to select the iPod.
Operating this unit
En
30
Section
03