Pioneer CNDV-80MT - Manual (Page 8)

In case of the cross disc routing
Only when setting your destination for the
another disc, it is necessary to replace from the
current disc to another disc.
In case of the cross disc routing, the following
procedure is recommended.
1
Insert the disc containing the destination
you want to set.
2
Search for the destination and set as your
destination.
3
After route calculation finished, remove
the current disc.
4
Insert the disc containing your current
location.
❒
The navigation system reboot automati-
cally with keeping your destination and
route set.
❒ To play DVD-video or CD, remove the DVD
Map Disc after the “Memory navi indicator”
stops flashing.
5
Drive toward your destination.
❒
When you approach the areas not stored
on the disc, the navigation system notify
you of approaching that area. Replace the
disc at that time.
❒ Removing the disc and inserting another disc
causes the navigation system to automatically
restart and reload the new route. (This auto-
matic “Reroute” operation cannot be can-
celled.)
Renewed point of AVIC-X1,
AVIC-X1R
Changes to appearance
The appearance of the navigation menu and AV
menu will change as follows:
Navigation menu
AV menu
Easy operation for expanded
coverage (Country selection
table)
The screen to select a country you want to search
during a search step (“Country selection table”)
will be changed to a table format to comply with
expanded coverage area. Select a country you
want to search from the table.
Country codes
Selected country
MAN-CNDV-80MDX-EN.fm Page 8 Wednesday, April 2, 2008 9:33 AM