Pioneer VSX-D710S - Manual (Page 14)

14
En
Connecting Your Equipment
1 Twist exposed wire
strands together.
2 Loosen speaker terminal
and insert exposed wire.
3 Tighten terminal.
Speaker terminals
3/8 in. (10mm)
Hints on Speaker Placement
Speakers are usually designed with a particular place-
ment in mind. Some are designed to be floor standing,
while others should be placed on stands to sound their
best. Some should be placed near a wall; others should
be placed away from walls. Follow the guidelines on
placement that the speaker manufacturer provided with
your particular speakers to get the most out of them.
• Place the front left and right speakers at equal
To achieve the best possible surround sound, install your
speakers as shown on the right. Be sure all speakers are
installed securely to prevent accidents and improve
sound quality.
distances from the TV.
• When placing speakers near the TV, we recommend
using magnetically shielded speakers to prevent
possible interference, such as discoloration of the
picture when the TV is switched on. If you do not
have magnetically shielded speakers and notice
discoloration of the TV picture, move the speakers
farther away from the TV.
• Install the center speaker above or below the TV so
that the sound of the center channel is localized at
the TV screen.
CAUTION!
If you choose to install the center speaker on top
of the TV, be sure to secure it with putty, or by
other suitable means, to reduce the risk of damage
or injury resulting from the speaker falling from
the TV in the event of external shocks such as
earthquakes.
• If possible, install the surround speakers slightly
above ear level.
• Try not to install the surround speakers farther away
from the listening position than the front and center
speakers. Doing so can weaken the surround sound
effect.
Overhead view of speaker set up ~VSX-D710S~
3-D view of speaker set up
Surround Left Surround Right
Listening Position
Front
Left Front
Right
Center
Subwoofer
Overhead view of speaker set up ~VSX-D810S/D850S~
3-D view of speaker set up
Surround Left Surround Right
Listening Position
Front
Left Front
Right
Center
Subwoofer
Surround Back
Caution:
Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If
any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure.
The speaker terminals also
accept single banana plugs.
(Refer to speaker manual for
details.)