Pioneer SPH-DA100 - Manual (Page 14)

Installation 03
Section
14
Engb
Installing this product
Installation notes
Do not install this product in places subject
to high temperatures or humidity, such as:
– Places close to a heater, vent or air con-
ditioner.
– Places exposed to direct sunlight, such
as on top of the dashboard.
– Places that may be exposed to rain,
such as close to the door or on the
vehicle’s floor.
Install this product in an area strong enough
to bear its weight. Choose a position where
this product can be firmly installed, and
install it securely. If this product is not
securely installed, the current location of
the vehicle cannot be displayed correctly.
Install this product horizontally on a surface
within 0 to 60 degrees tolerance. Improper
installation of the unit with the surface
tilted more than these tolerances increases
the potential for errors in the vehicle’s loca-
tion display, and might otherwise cause
reduced display performance.
60°
•
•
•
When installing, to ensure proper heat dis-
persal when using this unit, make sure you
leave ample space behind the rear panel
and wrap any loose cables so they are not
blocking the vents.
Leave ample
space
5 cm
5 cm
•