Pioneer SPH-DA100 - Manual (Page 15)

03 Installation
Section
15
Engb
English
Parts supplied
Parts marked (*) are pre-installed.
The display unit Holder*
Flush surface screw
(5 mm × 9 mm)
(6 pcs.)
Truss head crew
(5 mm × 8 mm)
(6 pcs.)
Trim ring* Extraction key
(2 pcs.)
Before installing this product
1 Remove the trim ring.
Extend top and bottom of the trim ring
outwards to remove the trim ring.
Trim ring
2 Insert the supplied extraction keys
into both sides of the unit until they
click into place.
3 Pull the unit out of the holder.
Extraction key