Connecting an external decoder box (1), Connecting up 02, Important – Pioneer DVR-530H-S User Manual
Page 17
Connecting up
02
17
En
Connecting an external decoder box (1)
If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this
page. See the previous page for how to connect the G-LINK™ cable.
Important
• Do not connect your decoder box directly to this recorder.
• Information from the decoder (for example, relating to pay TV services), is only viewable when this recorder is off
(in standby).
• For timer recording to work properly on this recorder, the VCR/satellite receiver/cable box must also be switched
on during recording.
• It is not possible to watch one TV program and record another using this setup.
1
Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR/satellite
receiver/cable box.
2
Use a SCART cable (not supplied) to connect your
decoder to your VCR/satellite receiver/cable box.
See the manual for your decoder box for more detailed
instructions.
3
Use a SCART cable to connect your VCR/satellite
receiver/cable box to the AV2(INPUT 1/DECODER)
AV connector on this recorder.
4
Use a SCART cable to connect the AV1(RGB)-TV
AV connector to your TV.
TV
Antenna/cable TV
wall outlet
VCR/Satellite receiver
/Cable box
Decoder
DIGITAL
OUT
CONTROL
G-LINK
IN
OPTICAL
AV 1 (RGB) – TV
AV 2 (INPUT 1/DECODER)
S-VIDEO
VIDEO
AUDIO
L
R
COMPONENT VIDEO OUT
Y
P
B
P
R
ANTENNA
IN
OUT
AC IN
OUTPUT
S-VIDEO
VIDEO
AUDIO
L
R
INPUT 3
SCART AV
CONNECTOR
SCART AV
CONNECTOR
SCART AV
CONNECTOR
ANTENNA
IN
1
4
2
3
DVR-530H_EU.book 17 ページ ２００５年２月１４日 月曜日 午後２時２０分