Install the hood, Connect ductwork – Broan RMPE User Manual

Page 5

Advertising
background image

- 5 -

INSTALL THE HOOD

1. Remove the grease filters by pushing filter

towards the back of hood and rotating filter
downward.

2. Remove the metal grille by moving the 2

side fasteners.

3. Cut a hole in the bottom of the cabinet, using

the dimensions shown.

4. Adjust the position of the clasping side spring

by means of the proper screw, according to
the thickness of the panel to which it is going
to be anchored.

5. Insert the hood in the cabinet and lock it by

means of the side spring.

6. Use the holes in the casing of the hood to

attach it using 4 mounting screws.

7. Replace grille and filters.

GREASE FILTERS

METAL GRILLE

10-1/4”

26-5/8”

CUT A HOLE IN THE BOTTOM OF

THE CABINET

min 7-16”

max 13/16”

CLASPING

SIDE SPRING

MOUNTING SCREWS

CONNECT DUCTWORK

1. Connect 8" round metal duct to the

discharge collar on the hood.

2. Use duct tape to make all joints secure and

air tight.

8” ROUND METAL DUCT

Advertising