Bravo View IND-5000BT - Manual (Page 28)

27
Specifications
General
Power supply: 12VDC (11V-16V), Test voltage 14.4V, negative ground
Maximum power output: 45W x 4 channels
Continuous power output: 20W x 4 channels (4 10% T.H.D.)
Suitable speaker impedance: 4-8ohm
Pre-Amp output voltage: 4.0V (CD play mode: 1KHz, 0dB, 10K load)
Fuse: 15A
Dimensions (WxHxD): 178 x 50 x 166mm
Weight: 1.7kg
Aux-in level: 500mV
Sub-out: 4.0V (CD play mode: 61Hz, 0dB, 10K load)
3.5 Inch TFT LCD
Display resolution (dot) 320×(RGB)×234
Active area (mm) 76.32 (H)×42.822 (V)
Screen size (inch) 3.5 (16:9l)
Dot pitch (mm) 0.2385 (H) x 0.183 (V)
Contrast ratio 350
Brightness 350nits
FM Stereo Radio
Frequency range: 87.5-108.0MHz (Europe)
87.5-107.9MHz (America)
Usable sensitivity: 8dB μ
Frequency response: 30Hz-15KHz
Stereo separation: 30dB(1KHz)
Image response ratio: 50dB
IF response ratio: 70dB
Signal/noise ratio: >55dB
AM(MW) Radio
Frequency range 522-1620KHz (Europe)
530-1710KHz (America)
Usable sensitivity (S/N=20dB) 30dBμ
Disc Player
System: Disc digital audio system
Frequency response: 20Hz - 20KHz
Signal/noise ratio: >80dB
Total harmonic distortion: Less than 0.20% (1KHz)
Channel separation: >60dB
Video signal format system: PAL/NTSC/AUTO
Video output: 1 0.2V
Components
Mounting sleeve 1
Machine screws M5x6 mm 4
Mounting bolt (50 mm) 1
Wire connector 1
Removable face plate case 1
Trim plate 1
Removal key 2
Operating Instructions 1
Rubber cushion 1
Remote control 1
Note:
Specifications and the design are subject to
change without notice due to improvements.