The initial setup menu 08, Component video, Input adjust – Pioneer DVR-230-S User Manual

Page 55: Playback adjust

Advertising
background image

The Initial Setup menu

08

55

En

Important

• If you make a setting here that is incompatible with

your TV, the TV may not display any picture at all. If
this happens either switch everything off and
reconnect to the TV using either the supplied video
cable, or an S-video cable (see

Using the S-video or

component video output

on page 12 for more on this),

or reset the recorder (see

Resetting the recorder

on

page 70 for how to do this).

Video

– Compatible with all TVs, but lowest quality of

the three AV settings.

S-Video

– Almost the same quality as RGB, but can

give better results if you are using a long SCART
cable.

RGB

– If your TV is compatible, this setting gives the

best picture quality.

Note

• When set to RGB, the

Component Video

setting has

no effect.

Component Video

• Default setting:

Interlace

You only need to make this setting if you connected this
recorder to your TV using the component video jacks.

If your TV is compatible with progressive-scan
component video, set this

Progressive

for the highest

quality picture. If your TV is not compatible with
progressive-scan video, leave it set to

Interlace

.

• See also

Progressive scan video

in the glossary on

page 71.

Important

If you switch to

Progressive

when using a TV that is not

compatible with progressive-scan video, you will not be
able to see anything displayed on your TV. If this happens,
press and hold the

+

button on the front panel, then press

STANDBY/ON

. This will set the recorder’s video

output back to

Interlace

.

Input Adjust

Use this setting to adjust the amount of noise reduction
(NR) applied to the video signal.

From the Input Adjust screen, use the

/

buttons to

adjust the

NR

setting from

Off

to

Max

.

Press

ENTER

to confirm and exit the screen.

Playback Adjust

Use the various Playback Adjust settings to adjust the
picture quality of the video output.

Video Out

Video

Interlace

AV1 Out

Component Video

Video Out

Video

Interlace

AV1 Out

Component Video

Basic

Disc

Video

Audio

Recording

Playback

Video Out

Video In

Input Adjust

Playback Adjust

Video

Input Adjust

NR

Off

Max

Basic

Disc

Video

Audio

Recording

Playback

Video Out

Video In

Input Adjust

Playback Adjust

Video

Basic

Disc

Video

Audio

Recording

Playback

Video Out

Video In

Input Adjust

Playback Adjust

Pure Cinema

Block NR

Mosquito NR

White Level

Chroma Level

Video

DVR-230_UK.book Page 55 Friday, July 1, 2005 11:52 AM

Advertising