Pioneer AVIC-X1R - Manual (Page 21)

• The cords must not cover up the area shown in the figure below. This is necessary to
allow the amplifiers and navigation mechanism to heat dissipate freely.
• The semiconductor laser will be damaged if it overheats, so don’t install the unit any-
where hot — for instance, near a heater outlet.
• When installing the Hide-away unit in the boot, use the extension cable (e.g. CD-
SC300E) (sold separately).
• Do not install the display unit in a position where the opening of the LCD panel is
obstructed by any obstacles, such as the gearstick. This may cause interference with the
gearstick, or a malfunction of the mechanism of the display unit.
Do not cover this area.
Hide-away unit
Do not cover this area.
Display unit
20
ENG/MASTER 96
English
Español
Deutsch
Français
Italiano
Nederlands
<CRD3958A/U> 21
CRD3958A_U_inst001_031_UK 11/12/04 13:09 Page 21