Pioneer PDK-WM03 - Manual (Page 12)

To the Dealer and the Installer
For the safety of the customer, we ask
that the installation work only be started
after the strength of the mounting loca-
tion has been carefully studied to be
sure it can withstand the combined
weight of the plasma display and mount-
ing hardware.
Be sure that three or more persons en-
gage in the installation work.
Be careful not to lose any screws that
have been removed, extra parts, etc.
Thank you for your purchase of this Pioneer plasma display mounting unit (PDK-WM03).
Please read this operating instructions carefully to ensure proper, safe use.
* This mounting unit is designed specifically for use with Pioneer 61-inch plasma displays.
Please check that the plasma display can accommodate the unit before use.
When opening the package, check that the parts listed below
are present in the proper quantities.
Eye bolt
CONTENTS
Package Parts List ........................................................................ Front Cover
Heed the Following ....................................................................................... 2
Ⅲ Horizontal Installation
1. Attaching the Display Fittings to the Plasma Display ............................. 4
2. Attaching the Wall Mounting Unit to the Wall ....................................... 4
3. Attaching the Plasma Display ................................................................ 5
Ⅲ Vertical Installation (PDP-614MX only)
1. Attaching the Bracket(s) and Display Fittings to the Plasma Display ..... 6
2. Attaching the Wall Mounting Unit to the Wall ........................................ 6
3. Attaching the Plasma Display ................................................................ 7
Positional Relationship Between the Wall Mounting Unit and the Display ... 10
■
Package Parts List
Display fittings
For the Left x1 For the Right x1
Wall mounting unit x1
M8 screws x6
M5 screws x2
Brackets x2
Eye bolt
Operating Instructions
Notes on Installation Work:
This product is marketed assuming that it is installed by qualified personnel with enough skill and competence.
Always have an installation specialist or your dealer install and set up the product.
PIONEER cannot assume liabilities for damage caused by mistake in installation or mounting, misuse, modification or a
natural disaster.
(PDP-614MX only)