Front panel, Controls and displays, Controls and displays 03 – Pioneer F-F6MK2-K User Manual

Page 10: Chapter 3

Advertising
background image

Controls and displays

03

10

En

Chapter 3:

Controls and displays

Front panel

1

POWER

OFF ON

1

2

STANDBY indicator

3

Display

Tip

• Liquid Crystal Display

The LCD used in this unit has a tendency to
change color in response to the
surrounding temperature. The display’s
color tone may turn gray or its ability to
switch between displayed information may
slow down when the room is not at
optimum temperature, or when the unit
has been operating for a long period of
time. However, these are only temporary
symptoms and regular functionality will be
restored once the unit returns to optimum
temperature.

4

SECONDARY indicator

Lights when a secondary service is available
(page 20).

5

RDS indicator

Lights when an RDS broadcast is received, and
flashes during RDS search.

6

TUNED indicator

Lights when a station is properly tuned in.

7

STEREO indicator

Lights red when a stereo broadcast is received.
Goes off when a monaural broadcast is
received. Lights blue when the MPX mono
mode is selected.

ON

OFF

POWER

STANDBY

F6

SECONDARY RDS

TUNED

STEREO

BAND

DISPLAY

AUTO TUNE

MENU

TUNING/PRESET

13

12

3

6

5

1

2

7

4

8

9

10

11

Note

1 • Remember that even when the unit is in the standby mode, it remains connected to the AC line voltage. Be sure to unplug

the power cord whenever leaving your home for vacations or when otherwise not using the unit for extended periods of time.

• When the unit is in the standby mode, if the power is turned off by pressing the main unit’s

POWER button, the power will

not turn on if the button is pressed again.
To turn on the power in this case, press either the remote control unit’s

TUNER

 button or a different button (other than

the

POWER button) on the main unit.

• When the unit is in the standby mode, if the power is turned off by unplugging the power cord, the power will not turn merely

by reconnecting the power cord.
To turn on the power in this case, reconnect the power cord and then press either the remote control unit’s

TUNER

 button

or a different button (other than the

POWER button) on the main unit.

01_F-F6MK2_en.book 10 ページ 2009年4月3日 金曜日 午後1時41分

Advertising