Pioneer F-F6MK2-K - Manual (Page 25)

Listening to DAB broadcasts 05
25
En
English
Français
Deutsch
Nederlands
Italiano
Español
DRC (Dynamic Range Control)
• The DRC (Dynamic Range Control)
function lets you change the dynamic
range of the received sound depending on
the content of the broadcast so that the
sound is easier to hear even when the
volume is low.
• The dynamic range can be fine-adjusted in
three steps.
1 Press the POWER or TUNER  button to
turn on the power.
2 Press the MENU button to select menu.
3 Either turn the TUNING/PRESET dial or
press the / button to display the DRC
value mode selection screen.
4 Press the TUNING/PRESET dial or ENTER
button to set the DRC value mode.
5 Either turn the TUNING/PRESET dial
clockwise or press the / button.
• The display changes as follows each time
the TUNING/PRESET dial is turned
clockwise or the
 button is pressed.
DRC OFF: DRC is switched off.
Any DRC level broadcast will be
ignored. This is the default
setting.
DRC ON : Applies DRC level as sent with
the broadcast.
• This is effective when listening in
environments subjected to surrounding
noise, and while listening to quiet sections
of broadcast programs.
The broadcast’s DRC level is set at the
broadcast station.
The DRC can be changed to achieve the
optimum level.
TUNER DIMMER
A/B/C D/E/F MPX
G/H I / J DISPLAY
BAND TUNE MEMORY
PRESET ENTER PRESET
TUNE
MENU
A.PRESET
A.TUNE
ON OFF
POWER
STANDBY
F6
SECONDARY RDS TUNED STEREO
BAND
DISPLAY AUTO TUNE
MENU TUNING/PRESET
01_F-F6MK2_en.book 25 ページ ２００９年４月３日 金曜日 午後１時４１分